mount command - NexonHost.com

How To Use Mount Command.The Linux file system hierarchy is arranged in a tree, with the file system starting from the root directory (/). All other child file systems branch out from the root directory.The mount command allows users to mount, i.e., attach additional child file systems to a particular mount point on the currently accessible file system. The command passes the mount instructions to the kernel, which completes the operation. Linux mount Command SyntaxThe standard mount command syntax is:mount -t The command instructs the kernel to attach the file system found on at the directory. The -t option is optional, and it describes the file system type (EXT3, EXT4, BTRFS, XFS, HPFS, VFAT, etc.).If the destination directory is omitted, it mounts the file systems listed in the /etc/fstab file.While the file system is mounted, the previous contents, owner, and mode of the directory are invisible, and the pathname refers to the file system root.Exit StatusThe mount command returns one of the following values that indicate the process completion status:0. Success.1. Incorrect command invocation or insufficient permissions.2. System error.4. Internal mount bug.8. Operation interrupted by user.16. Issues with writing or locking the /etc/mtab file.32. Mount failure.64. At least one mount operation succeeded, but not all. mount Command OptionsThe mount command options further specify file system types, mount location, and type. The following table shows the most common mount options:OptionDescription-aMounts all file systems listed in /etc/fstab.-FForks a new incarnation of mount for each device. Must be used in combination with the -a option.-hDisplays the help file with all command options.-lLists all the file systems mounted and adds labels to each device.-L Mounts the partition with the specified .-MMoves a subtree to another location.-O Used in combination with -a, it limits the file system set that -a applies to. The refers to options specified in the options field of the /etc/fstab file. The command accepts multiple options specified in a comma-separated list (without spaces).-rMounts the file system in read-only mode.-RRemounts a subtree in a different location, making its contents available in both places.-t Indicates the file system type.-TUsed to specify an alternative /etc/fstab file.-vMounts verbosely, describing each operation.-VDisplays the program version information.Run the man mount command for a complete list of options, syntax forms, and filesystem-specific mount options. Linux mount Command ExamplesOutlined below are the most common use cases of the mount command. List Mounted File SystemsRun the mount command without any options to display all currently mounted file systems. The output also displays the mount points and mount options. List Specific File SystemsThe -t option allows users to specify which file systems to display when running the mount command. For example, to show only ext4 file systems, run the following command:mount -t ext4 Mount a File SystemMounting a file system requires the user to specify the directory or mount point to which the file system will be attached. For example, to mount the /dev/sdb1 file system to the /mnt/media directory, run:sudo mount /dev/sdb1 /mnt/mediaTo specify additional file system-specific mount options, pass the -o flag followed by the options before the device name. Use the following syntax:mount -o See the man page or help file for a complete list of available options. Mount File System with /etc/fstabThe /etc/fstab file contains lines describing the mount location of system devices and the options they are using. Generally, fstab is used for internal devices, such as CD/DVD devices, and network shares (samba/nfs/sshfs). Removable devices are typically mounted by the gnome-volume-manager.Providing only one parameter (either or ) causes mount to read the contents of the /etc/fstab configuration file to check if the specified file system is listed in it. If the given file system is listed, mount uses the value for the missing parameter and the mount options specified in the /etc/fstab file.The defined structure in /etc/fstab is: To mount a file system specified in the /etc/fstab file, use one of the following syntaxes:mount mount For , specify the mount point.For , specify the device identifier.See the mount command man page or run man mount for a comprehensive list of file system-specific and file system-independent options. Mount USB DriveModern Linux distributions automatically mount removable drives after insertion. However, if the automatic mount fails, follow the steps below to mount the USB drive manually:Create a mount point using themkdir command:mkdir /media/usb-driveFind the USB device and file system type. Run:fdisk -lUsing the device identifier from fdisk output, mount the USB drive using the following syntax:sudo mount /media/usb-driveFor example, if the device is listed as /dev/sdb1, run:sudo mount /dev/sdb1 /media/usb-drive Mount a CD-ROMBeing a removable device, Linux automatically mounts CD-ROMs as well. However, if mounting fails, mount a CD-ROM manually by running:mount -t iso9660 -o ro /dev/cdrom /mntMake sure that the /mnt mount point exists for the command to work. If it doesn't, create one using the mkdir command.iso9660 is the standard file system for CD-ROMs, while the -o ro options cause mount to treat it as a read-only file system. Mount ISO FilesMounting an ISO file requires mapping its data to a loop device. Attach an ISO file to a mount point using a loop device by passing the -o loop option:sudo mount /image.iso /media/iso-file -o loop Mount an NFSA Network File System (NFS) is a distributed file system protocol for sharing remote directories over a network. Mounting an NFS allows you to work with remote files as if they were stored locally.Follow the steps below to mount a remote NFS directory on your system:Create a mount point using the mkdir command:sudo mkdir /media/nfsMount the NFS share by running:sudo mount /media/nfsTo automatically mount the remote NFS share at boot, edit the/etc/fstab file using a text editor of your choice:sudo vi /etc/fstabAdd the following line to the file and replace remote.server:/dir with the NFS server IP address or hostname and the exported directory:remote.server:/dir /media/nfs nfs defaults 0 0 Non-Superuser MountingAlthough only a superuser can mount file systems, file systems in the /etc/fstab file containing the user option can be mounted by any system user.Edit the /etc/fstab file using a text editor and under the field specify the user option. For example:/dev/cdrom /cd iso9660 ro,user,noauto,unhideAdding the line above to /etc/fstab allows any system user to mount the iso9660 file system from a CD-ROM device.Specifying the users option instead of user allows any user to unmount the file system, not only the user that mounted it. Move a MountIf you decide to move a mounted file system to another mount point, use the -M option. The syntax is:mount --move For , specify the current mount point. For , specify the mount point to which you want to move the file system.Moving the mounted file system to another mount point causes its contents to appear in the directory but doesn't change the physical location of the files. How to Unmount a File SystemTo unmount, i.e., detach an attached file system from the system tree, use the umount command. Detach the file system by passing either its mount point or the device name.The syntax is:umount orumount For example, to detach a USB device listed as /dev/sdb1, run:umount /dev/sdb1While busy with open files or ongoing processes, a file system cannot be detached, and the process fails. If you aren't sure what's using the file system, run the fuser command to find out:fuser -m For , specify the file system mount point. For example:fuser -m /media/usb-driveThe output lists the PIDs of processes currently accessing the device. Stop the processes and unmount the file system. Lazy UnmountIf you don't want to stop the processes manually, use the lazy unmount, which instructs the unmount command to detach the file system as soon as its activities stop. The syntax is:umount --lazy Forced UnmountThe -f (--force) option allows users to force an unmount. However, be cautious when force unmounting a file system as the process may corrupt the data on it.The syntax is:umount -f ConclusionThis tutorial showed how to use the mount command to attach various file systems to the directory tree and provided other practical examples. The tutorial also showed how to use the umount command to detach a file system.

Bare Metal

Servers

Storage

Virtual Servers

Linux VPS

Unmetered Linux VPS

Windows VPS

Unmetered Windows VPS

Storage VPS

OpenClaw Hosting

Remote Protection

Website DDoS Protection

Remote DDoS Protection License

Colocation

Server Colocation

Management

Infrastructure Management

Cloud Hosting

Magento Pro Hosting

OpenCart Hosting

Reseller Pro Hosting

PrestaShop Hosting

WordPress Pro Hosting

Web Hosting

Netherlands

Romania

Germany

Tag Archives: mount command

Recent Posts

Categories

Follow us

Our Products

Dedicated Servers

Compare us with Competitors

Quick Links

Newsletter