localhost - NexonHost.com

What is localhost? Computer machines are identified by their hostname and IP address. The below diagram briefly illustrates it. Likewise, we also have a common name for all the computer systems that used to call itself is known as localhost. Here, the term “localhost” is associated with the context of computer networking. It plays a vital role during our journey as a developer or system administrator. There are many use cases for the “localhost,” such as application testing, documentation, network performance testing, and site blocking. What is Localhost? Localhost is a hostname that refers to the computer system on which the calling program is running, which means the machine will talk to itself when we call localhost. It helps us to check the network services in the machine, even during network hardware failures. When using “localhost” the network services are accessed through the logical network interface called loopback. The IP address of the loopback interface is 127.0.0.1. Thus, the localhost resolves to 127.0.0.1 as part of the name resolution. What is a Loopback Address? Loopback is a logical network interface present in all operating systems. The packets transmitted through this interface are returned (looped) back to the same interface in the same machine. Hence, the interface is called a loopback. According to the IETF Standards for IPv4 addressing, the entire block of 127.0.0.0/8 is allocated for network loopback purposes. As the default behavior, a loopback interface gets configured after every server installation. Let’s have a look at the below snippet. ip a show lo lo: flags73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 76238871 bytes 6955286874 (6.9 GB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 76238871 bytes 6955286874 (6.9 GB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 sudo cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 sandbox1 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback Loopback Packet Processing Internals Generally, Loopback packets are distinguished from the other IP packets by their addresses. The processing of loopback packets with the loopback address happens at the link layer of the TCP/IP Stack. This traffic will be passing inside the computer systems itself. It will not hit the Hardware NIC Cards like other IP packets. Additionally, there exists a rule that the routers should not route the loopback IP address. For instance, when we request for 127.0.0.1 address. The request will not forward to the internet because of the first octet (127). Here, the TCP/IP stack recognizes the request and routes it back to the same machine. A quick illustration of the packet flow walkthrough for localhost and other IP packets is below. ping -c 4 localhost PING localhost (127.0.0.1) 56(84) bytes of data. 64 bytes from liviu.test (127.0.0.1): icmp_seq1 ttl64 time0.101 ms 64 bytes from liviu.test (127.0.0.1): icmp_seq2 ttl64 time0.091 ms 64 bytes from liviu.test (127.0.0.1): icmp_seq3 ttl64 time0.076 ms 64 bytes from liviu.test (127.0.0.1): icmp_seq4 ttl64 time0.069 ms --- localhost ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2999ms rtt min/avg/max/mdev 0.069/0.084/0.101/0.014 ms ping -c 4 staging.nexonhost.com/ PING staging.nexonhost.com/ (89.45.12.91) 56(84) bytes of data. 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq1 ttl63 time0.565 ms 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq2 ttl63 time0.589 ms 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq3 ttl63 time0.609 ms 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq4 ttl63 time0.633 ms --- staging.nexonhost.com/ ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev 0.565/0.599/0.633/0.025 ms Application Testing Using Localhost The accessibility of the application service first happens through the network interface. If the application service is mapped with a physical interface, it can be accessible from the outside world. Likewise, if the application is mapped with a logical loopback interface, it can be accessed only from that specific computer system and cannot be accessible from the outside world. It is always easy to develop and test the code from the local server than from another remote host. To achieve that, we map our production domain name with a new loopback address (127.0.1.100) in the /etc/hosts file. Entries in the /etc/hosts have precedence over DNS. ping -c 4 staging.nexonhost.com/ PING staging.nexonhost.com/ (89.45.12.91) 56(84) bytes of data. 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq1 ttl63 time0.640 ms 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq2 ttl63 time0.757 ms 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq3 ttl63 time0.634 ms 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq4 ttl63 time0.668 ms --- staging.nexonhost.com/ ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev 0.634/0.674/0.757/0.058 ms sudo cat /etc/hosts 127.0.0.1 liviu.test ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 ping -c 4 staging.nexonhost.com/ PING staging.nexonhost.com/ (89.45.12.91) 56(84) bytes of data. 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq1 ttl63 time0.482 ms 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq2 ttl63 time0.595 ms 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq3 ttl63 time0.837 ms 64 bytes from 89.45.12.91 (89.45.12.91): icmp_seq4 ttl63 time0.607 ms --- staging.nexonhost.com/ ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev 0.482/0.630/0.837/0.130 ms Conclusion Localhost is the default name of the system where our program runs that helps us test applications and troubleshoot network issues. It is achieved using a local loop mechanism through the loopback network interface. It helps us testing software without network hardware configuration dependencies. As a computer user, it is essential to have a basic understanding of the terms localhost and loopback network interfaces.

Bare Metal

Servers

Storage

Virtual Servers

Linux VPS

Unmetered Linux VPS

Windows VPS

Unmetered Windows VPS

Storage VPS

OpenClaw Hosting

Remote Protection

Website DDoS Protection

Remote DDoS Protection License

Colocation

Server Colocation

Management

Infrastructure Management

Cloud Hosting

Magento Pro Hosting

OpenCart Hosting

Reseller Pro Hosting

PrestaShop Hosting

WordPress Pro Hosting

Web Hosting

Netherlands

Romania

Germany

Tag Archives: localhost

Recent Posts

Categories

Follow us

Our Products

Dedicated Servers

Compare us with Competitors

Quick Links

Newsletter