Let’s Encrypt - NexonHost.com

How to Install Let’s Encrypt with Apache on CentOS 7 In this tutorial, we will show you how to install the Let’s Encrypt client on your CentOS 7 VPS and issue an SSL certificate for your domain. Improving your website security through SSL encryption can increase your visitors’ trust in your website. In the past, setting up SSL encryption on a website was a complicated task. However, Let’s Encrypt is a free and open source certificate authority (CA) that allows obtaining and installing certificates through simple, automated commands. Thanks to them, setting up encryption and increasing the security of your site is made a lot easier. Let’s Encrypt provides a valid SSL certificate for your domain without any cost and can be used for production/commercial use as well. Let’s begin with the installation – it’s a simple install, and it won’t take long at all. Step 1: Connect via SSH and Update the OS Connect to your server via SSH as the root user using the following command: ssh root@IP_ADDRESS -p PORT_NUMBER Remember to replace “IP_ADDRESS” and “PORT_NUMBER” with your server’s respective IP address and SSH port number. Before starting with the installation, you will need to update your OS packages to their latest versions. It’s easy to do, and it won’t take more than a few minutes. You can do this by running the following command: yum update Once the updates are completed, we can move on to the next step. Step 2: Install LAMP Stack We need to install the LAMP stack on the server. It consists of Linux (which we already have), Apache, MySQL, and PHP. We can install it by running the following command: yum install httpd mariadb-server php php-cli php-common Once all the packages are installed, start the Apache and MariaDB services: systemctl start httpd systemctl start mariadb Enable them to start on server boot with the following command: systemctl enable httpd systemctl enable mariadb Step 3: Configure Apache We need to create a new Apache configuration file. We can create it with the following command: nano /etc/httpd/conf.d/domain.com.conf Add the following lines: ServerAdmin admin@domain.com DocumentRoot "/var/www/html" DirectoryIndex index.html ServerName domain.com ErrorLog "/var/log/httpd/domain.com.error_log" CustomLog "/var/log/httpd/domain.com.access_log" common Save and close the file. Then, create an index.html file for testing purposes with the following command: nano /var/www/html/index.html Add the following lines: Test - Welcome to The Apache Web Server. Save the file and change owner of the ‘/var/www/html/index.html’ file to the Apache user so Apache can read the file: chown -R apache:apache /var/www/html/index.html Remember to change domain.com with your actual domain name. Now that we have Apache installed we can continue and install certbot. Step 4: Install Certbot We need to install Certbot and enable the mod_ssl Apache module on the server. Certbot is a simple and easy to use tool that simplifies server management by automating obtaining certificates and configuring web services to use them. By default, Certbot package is not available in the CentOS 7 default OS repository. We need to enable the EPEL repository, then install Certbot. To add the EPEL repository run the following command: yum install epel-release Once enabled, install all the required packages with the following command: yum install certbot python2-certbot-apache mod_ssl Once installed, we can proceed to the next step. Step 5: Obtain and Install SSL for Your Domain Now that Certbot is installed, you can use it to obtain and install an SSL certificate for your domain. Simply run the following command to obtain and install an SSL certificate for your domain: certbot --apache -d domain.com We can also install a single certificate for multiple domains and subdomains hosted on the server with the ‘-d’ flag, e.g.: certbot --apache -d domain.com -d www.domain.com -d domain2.com -d test.domain2.com We will be asked to provide an email address and agree to the terms of service. Saving debug log to /var/log/letsencrypt/letsencrypt.log Plugins selected: Authenticator apache, Installer apache Enter email address (used for urgent renewal and security notices) (Enter 'c' to cancel): admin@domain.com Starting new HTTPS connection (1): acme-v02.api.letsencrypt.org - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Please read the Terms of Service at https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf. You must agree in order to register with the ACME server at https://acme-v02.api.letsencrypt.org/directory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (A)gree/(C)ancel: A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Would you be willing to share your email address with the Electronic Frontier Foundation, a founding partner of the Let's Encrypt project and the non-profit organization that develops Certbot? We'd like to send you email about our work encrypting the web, EFF news, campaigns, and ways to support digital freedom. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Y)es/(N)o: N Starting new HTTPS connection (1): supporters.eff.org Obtaining a new certificate Performing the following challenges: http-01 challenge for domain.com Waiting for verification... Cleaning up challenges Created an SSL vhost at /etc/httpd/conf.d/domain.com-le-ssl.conf Deploying Certificate to VirtualHost /etc/httpd/conf.d/domain.com-le-ssl.conf Type Y and hit , and you should see the following output: Please choose whether or not to redirect HTTP traffic to HTTPS, removing HTTP access. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1: No redirect - Make no further changes to the webserver configuration. 2: Redirect - Make all requests redirect to secure HTTPS access. Choose this for new sites, or if you're confident your site works on HTTPS. You can undo this change by editing your web server's configuration. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Select the appropriate number then (press 'c' to cancel): 2 Here, you need to choose any one option to continue. If you choose option 1, it will only download an SSL certificate and you need to configure Apache manually to use SSL certificate. If you choose option 2, it will automatically download and configure Apache to use SSL certificate. In this case, choose option 2 and hit . When the installation is successfully finished, you will see a message similar to this: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Congratulations! You have successfully enabled https://domain.com IMPORTANT NOTES: - Congratulations! Your certificate and chain have been saved at: /etc/letsencrypt/live/domain.com-0001/fullchain.pem Your key file has been saved at: /etc/letsencrypt/live/domain.com-0001/privkey.pem Your cert will expire on 2019-10-22. To obtain a new or tweaked version of this certificate in the future, simply run certbot again with the "certonly" option. To non-interactively renew *all* of your certificates, run "certbot renew" - If you like Certbot, please consider supporting our work by: Donating to ISRG / Let's Encrypt: https://letsencrypt.org/donate Donating to EFF: https://eff.org/donate-le The generated certificate files are available in the /etc/letsencrypt/live/domain.com directory. You can check the newly created SSL certificate with the following command: ls /etc/letsencrypt/live/domain.com/ You should see the following output: cert.pem chain.pem fullchain.pem privkey.pem Step 6: Check Your SSL Certificate Open your web browser and type the URL https://domain.com . To check the SSL certificate in Chrome, click on the padlock icon in the address bar for Website Domain Names, Online Stores & Hosting - Domain.com and from the pop-up box, click on ‘Valid’ under the ‘Certificate’ prompt. Step 7: Set up Automatic Renewal By default, Let’s Encrypt certificates are valid for 90 days, so it is recommended to renew the certificate before it expires. Ideally it would be best to automate the renewal process to periodically check and renew the certificate. We can test the renewal process manually with the following command. certbot renew --dry-run The above command will automatically check the currently installed certificates and tries to renew them if they are less than 30 days away from the expiration date. We can also add a cronjob to automatically run the above command twice a day. To do so, edit the crontab with the following command: crontab -e Add the following line: * */12 * * * root /usr/bin/certbot renew >/dev/null 2>&1 Save and close the file. Congratulations! We have successfully installed and configured Let’s Encrypt with Apache on a CentOS 7 VPS.

Bare Metal

Servers

Storage

Virtual Servers

Linux VPS

Unmetered Linux VPS

Windows VPS

Unmetered Windows VPS

Storage VPS

OpenClaw Hosting

Remote Protection

Website DDoS Protection

Remote DDoS Protection License

Colocation

Server Colocation

Management

Infrastructure Management

Cloud Hosting

Magento Pro Hosting

OpenCart Hosting

Reseller Pro Hosting

PrestaShop Hosting

WordPress Pro Hosting

Web Hosting

Netherlands

Romania

Germany

Tag Archives: Let’s Encrypt

Recent Posts

Categories

Follow us

Our Products

Dedicated Servers

Compare us with Competitors

Quick Links

Newsletter