How to update Kernel on CentOS 7

How to Update CentOS Kernel Version

The yum package manager allows kernel updates. However, CentOS does not offer the latest kernel version in the official repository.

To update the kernel on CentOS, you’ll need to install a third-party repository called ElRepo. ElRepo offers the latest kernel version available from kernel.org.

The official releases are tested to ensure they work properly and do not destabilize applications and OS functions. There are two types of Linux kernel versions:

  • Stable long-term supported kernel release – updated less frequently, but supported longer.

  • Mainline kernel release – a shorter support term but more frequent updates.

Step 1: Check Your Current Kernel Version

To check current kernel version on CentOS, open a command-line interface and enter following command:

uname -msr

The system should return with an entry that appears like this:

Output 2Linux 3.10.0-862.el7.x86-64 x86-64

The output indicates which version of the kernel you are currently running, and on which architecture it’s based on.

For additional information, refer to our detailed guide on how to check Linux kernel version.

Step 2: Update CentOS Repositories

Prior to upgrading the kernel, all packages must be updated to the latest version.

To update CentOS software repositories, use the command:

sudo yum -y update

Your software repository is now updated. This ensures you have access to the latest version of the kernel.

Step 3: Enable the ELRepo Repository

To install the new kernel version, a new repository (ELRepo repository) needs to be enabled.

In a terminal window, type:

sudo rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org

The previous command installs the GPG key for the ELRepo repository. This is important – CentOS will not allow the installation of an unsigned software package. The GPG key provides a digital signature to verify that the software is authentic.

Next, install the ELRepo repository by executing the following command:

sudo rpm -Uvh https://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm

Allow the system to finish performing the operation.

Step 4: List Available Kernels

To list available kernels, enter:

yum list available --disablerepo='*' --enablerepo=elrepo-kernel

The system should return a list of available modules. In the list, note the line that says kernel-lt – signifying a stable long-term support release – or kernel-ml – which indicates a mainline release, with a shorter support term but with more frequent updates.

Next, look at the right-hand column, and notice a series of letters and numbers (which looks something like ‘4.4.113-1.e17.elrepo’). This is the kernel version.

Use these two pieces of information to decide which kernel version you want to install. As you can see, the Linux 5 kernel is the latest mainline release.

Step 5: Install New CentOS Kernel Version

To install the latest mainline kernel:

sudo yum --enablerepo=elrepo-kernel install kernel-ml
 

To install the latest long-term support kernel:

sudo yum --enablerepo=elrepo-kernel install kernel-lt
 

The system should download the software, then prompt you to confirm that it’s OK to install – type y and press enter.

Allow the process to complete.

Step 6: Reboot and Select the New Kernel

Reboot your system by running the command:

reboot

You’ll be presented with the GRUB, or boot menu.

boot the latest linux kernel
 

Use the arrow keys to select the Linux kernel you have just installed, then press Enter. Your operating system should boot normally.

Step 7: Verify Functionality

Take a moment to check the functionalities of your CentOS system. Does all your software launch correctly and without errors? Do all your network functions work correctly?

Put your new kernel through its paces so all errors are identified and fixed in time. Or, if there aren’t any fixes, you can opt to switch back to the old kernel.

Step 8: Set Default Kernel Version

Once you confirm that the new kernel is compatible and working correctly, you’ll want to edit the GRUB boot utility so that, by default, it loads your new kernel.

Navigate to /etc/default/ and open the grub file with your text editor. Or, type the following in the terminal:

sudo nano /etc/default/grub

Once the file opens, look for the line that says GRUB_DEFAULT=X, and change it to GRUB_DEFAULT=0 (zero). This line will instruct the boot loader to default to the first kernel on the list, which is the latest.

Save the file, and then type the following command in the terminal to recreate the kernel configuration:

sudo grub2-mkconfig -o /boot/grub2/grub.cfg

Reboot once more:

reboot

Verify that the boot loader is set to load the latest kernel by default.

  • kernel update, centos 7, latest, long-term
  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

How to install and use MTR on Windows and Mac OS X

Install and use MTR on Windows Download WinMTR (Windows) (Windows) Run WinMtr.exe...

How to use worldshield.ws panel

Worldshield.ws is the DDoS mitigation control panel that nexonhost.com provides for you to manage...

How to get Real Visitors IPs on your backend

How to Get Real Visitor IPs in Web Server Access Logs In order to receive the real visitor IPs...

How to use the MTR command on Linux

How to use the MTR command on Linux   MTR (Matt’s traceroute) is a...

How to Install PowerDNS and Poweradmin on CentOS 7

Step 1 - Install EPEL and Remi Repositories First of all, we need to install dependencies for...